Century V6-3100 3.1L VIN M SFI (1998)
Engine Mount: Service and Repair
Engine Mount Strut Replacement (Left)
REMOVAL PROCEDURE
1. Remove the bolt and the nut from the engine mount strut at the left engine mount strut bracket on the engine.
2. Remove the bolt and the nut from the engine mount strut at the engine mount strut bracket on the upper radiator support.
3. Remove the engine mount strut.
4. Inspect the rubber in the engine mount strut for the following conditions:
^
Hardness
^
Splitting
^
Cracking
INSTALLATION PROCEDURE
1. Install the engine mount strut.