Century V6-3100 3.1L VIN M SFI (1998)
Camshaft Gear/Sprocket: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
-
J5825-A Crankshaft Sprocket Puller
1. Remove the engine front cover.
2. Rotate the crankshaft until the timing marks in the following locations are aligned:
^
The camshaft alignment pin (1).
^
The timing chain dampener (2) to the crankshaft sprocket (3).
^
The crankshaft key (4).
^
The timing chain dampener (5) to the camshaft sprocket locator hole (6).
3. Remove the camshaft sprocket bolt.
