Century V6-3100 3.1L VIN M SFI (1998)
Install or Connect
1. Heater core line clamp.
2. All foam seals to heater core case.
3. Heater core.
4. Heater core line clamp screw.
Tighten
^
Screw to 1.5 Nm (13 lb in).
5. Heater core mounting clip with screw.
Tighten
^
Screw to 1.5 Nm (13 lb in).
6. Heater cover with screws.
Tighten
^
Screws to 1.5 Nm (13 lb in).
7. Heater outlet case screws.
Tighten
^
Screws to 1.5 Nm (13 lb in).
8. Both lower instrument panel lower compartment.
9. Lower center console (if equipped).
10. Both heater hoses and clamps to heater core.
11. Refill coolant.
12. Fuel injector sight shield (3800 only). Refer to Engine Cover Replacement See: Engine, Cooling and Exhaust/Engine/Service and Repair.
13. Air cleaner and duct assembly on (3100 only).
