Century V6-3100 3.1L VIN M SFI (1998)
Headlamp Switch: Service and Repair
REMOVAL PROCEDURE
1. Using a plastic flat-bladed tool as an aid if necessary, pull the rearward edge of the LH instrument panel (IP) access opening cover outboard to
release the retainers.
2. Release the forward edge of the LH IP access opening cover from behind the hinge pillar and remove the cover.
3. Remove the screws retaining the headlamp switch.
4. Carefully pull the headlamp switch outboard away from the IP to access the electrical connector.
5. Disconnect the electrical connector from the headlamp switch.
INSTALLATION PROCEDURE