Century V6-3100 3.1L VIN M SFI (1998)
Shift Solenoid: Service and Repair
Solenoids and Wiring Harness Replacement
REMOVAL PROCEDURE
1. Remove the case side cover. Refer to Case Side Cover Replacement.
2. Use a small flat-bladed tool in order to remove the wiring harness from the solenoid valve(s) (315A, 315B, 322, 334, and/or 440), TFP manual
valve position switch (395) and/or the temperature sensor(391).
3. Remove the wiring harness (224).
4. Remove the clips retaining the solenoid(s).
5. Remove the solenoid(s).