Century V6-3100 3.1L VIN M SFI (1998)
Air Bag Control Module: Service and Repair
First Repair
IMPORTANT: If the SDM mounting holes or fasteners are damaged to the extent that the module can no longer be properly mounted use the following
repair. Torque the replacement fastener with a hand tool in order to prevent stripping the replacement fastener.
^
First Repair
1. Remove the stripped fastener and discard it.
NOTICE: Refer to Fastener Notice in Vehicle Damage Warnings.
2. Install the SDM with new fastener GM P/N 10156138.
3. Tighten
Tighten fastener to 10 N.m (89 lb. in).
