Century V6-3100 3.1L VIN M SFI (1998)
Seat Belt Retractor: Service and Repair
Removal Procedure
Description
1. Open the seat belt guide loop cover.
2. Remove the guide loop nut.
3. Remove the guide loop from the guide adjuster bracket.
4. Remove the center pillar lower trim. Refer to Center Pillar Lower Trim Panel in Doors.
5. Remove the intermediate guide bolts.
6. Remove the anchor plate nut from the seat stud.
7. Remove the anchor plate from the seat stud.
8. Remove the retractor side belt bolt.
9. Remove the retractor side belt from the center pillar.
