Century V6-3100 3.1L VIN M SFI (1998)
Power Steering Line/Hose: Service and Repair
Cooler to Return Pipe Hose
REMOVE OR DISCONNECT
1. Raise and suitably support vehicle.
2. Right front wheel and tire.
3. Loosen right side engine splash shield.
4. Exhaust pipe and catalytic converter.
5. Right tie rod nut and tie rod from steering knuckle.
6. Remove hose clamps retaining the hose.
7. Hose.
INSTALL OR CONNECT
1. Return hose and clamps.
2. Tie rod and nut to steering knuckle.
4. Tighten right side engine splash shield.
5. Right front wheel and tire.
6. Lower vehicle.
7. Fill system.
^
Adjust bleed power steering system.
^
Inspect for leaks.