Century V6-3100 3.1L VIN M SFI (1998)
Power Steering Pump Seal: Service and Repair
Drive Shaft Seal (Without Disassembly of Pump)
^
Tool Required:
-
J 7728 Shaft Oil Seal Installer
-
Or Equivalent
REMOVE OR DISCONNECT
1. Pump assembly from vehicle, if necessary for access.
Shaft Seal Removal
2. Protect drive shaft (7) with shim stock.
3. Seal (11) and discard. (Use small chisel to cut drive shaft seal.)
INSTALL OR CONNECT
Seal Installation
1. New drive shaft seal (11), lubricated with power steering fluid, using tool J 7728.
2. Pump assembly to vehicle, if removed.
