Century V6-3100 3.1L VIN M SFI (1998)
Shift Solenoid: Service and Repair
Solenoids and Wiring Harness Replacement
REMOVAL PROCEDURE
1. Remove the case side cover. Refer to Case Side Cover Replacement.
2. Use a small flat-bladed tool in order to remove the wiring harness (224) from the case electrical connector (35).
3. Use a small flat-bladed tool in order to remove the wiring harness from the solenoid valve(s) and/or the sensor.
4. Remove the oil pump in order to access the Torque Converter Clutch (TCC) Pulse Width Modulated (PWM) solenoid (325). Refer to Oil Pump
Replacement.
5. Remove the clips retaining the solenoid(s).
6. Remove the solenoid(s).
