Century V6-3100 3.1L VIN M SFI (1998)
6. Remove the drain pan from under the forward servo cover.
7. Adjust the jackstand to raise the rear of the frame.
8. Install the frame bolts.
9. Remove the support from the rear of the frame.
10. Install the power steering lines to the right side of the frame.
11. Install the engine mount lower bolts. Refer to Engine Mount Strut Replacement (Right) in Engine.
12. Install the transaxle mount lower bolts. Refer to Automatic Transmission Mount Replacement.
13. Install the power steering gear. Refer to Power Steering Gear Replacement in Steering.
14. Lower the vehicle.
15. Remove the J 36462.
16. Remove the J 28467-90.
17. Remove the J 28467-A.
