Century V6-3100 3.1L VIN M SFI (1998)
22. Install the left engine splash shield.
23. Install the left front wheel. Refer to Tire and Wheel Removal and Installation.
24. Lower the vehicle.
25. Install the engine mount struts. Refer to Engine Mount Strut Replacement (Right) and Engine Mount Strut Replacement (Left)
26. Remove the Engine Support Fixture.
27. Install the throttle body air inlet duct. Refer to Throttle Body Assembly Replacement in Powertrain Management.
28. Connect the battery ground (negative) cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
NOTICE: Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to
the transaxle.
29. Adjust the fluid level.
30. Inspect for fluid leaks.
