Century V6-3100 3.1L VIN M SFI (1998)
1. Install the transaxle oil cooler hoses.
2. Install the transaxle oil cooler hose clip bolt.
^
Tighten the transaxle oil cooler hose clip bolt to 25 Nm (18 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the transaxle oil cooler hoses to the transaxle oil cooler or the quick connect transaxle oil cooler pipes to the radiator Automatic
Transmission Oil Cooler Pipes Replacement (With Threaded Fittings)
4. Install the transaxle oil cooler clamps to the transaxle oil cooler hoses at the transaxle oil cooler pipes at the radiator.
5. Install the transaxle oil cooler hoses to the transaxle oil cooler fittings in the transaxle.
^
Tighten the transaxle oil cooler hose fittings to 23 Nm (117 ft. lbs.).
6. Lower the vehicle.
NOTICE: Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to
the transaxle.
7. Adjust the fluid level.
8. Inspect for proper completion of the repairs.
9. Inspect for fluid leaks.
