buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
A/T Range Selector Cable Replacement (New Cable Install Only)|Page 12484 > < A/T Range Selector Cable Replacement (New Cable Install Only)|Page 12482

Century V6-3100 3.1L VIN M SFI (1998)

Page 2
background image

6. Remove the automatic transaxle range selector cable through the hole in the dash.

INSTALLATION PROCEDURE

CAUTION:  Refer to Automatic Transaxle Range Selector Cable Caution in Service Precautions.

1. Properly route and position the automatic transaxle range selector cable.
2. Install the automatic transaxle range selector cable to the PNP switch. Refer to Automatic Transmission Range Selector Cable Replacement (New

Cable Installation Only).

3. Install the automatic transaxle range selector cable to the steering column bracket.

A/T Range Selector Cable Replacement (New Cable Install Only)|Page 12484 > < A/T Range Selector Cable Replacement (New Cable Install Only)|Page 12482