Century V6-3100 3.1L VIN M SFI (1998)
Shift Cable: Service and Repair
A/T Ranage Selector Cable Bracket Replacement
REMOVAL PROCEDURE
1. Remove the throttle body air inlet duct. Refer to Throttle Body Assembly Replacement in Powertrain Management.
2. Remove the automatic transaxle range selector cable from the automatic transaxle range selector lever.
3. Remove the automatic transaxle range selector cable from the bracket.
4. Remove the automatic transaxle range selector cable bracket bolts.
5. Remove the automatic transaxle range selector cable bracket.
INSTALLATION PROCEDURE