Century V6-3100 3.1L VIN M SFI (1998)
Power Window Switch: Technical Service Bulletins
Interior - Power Window Switch Removal Revision
Bulletin No.: 06-08-64-005
Date: January 31, 2006
SERVICE MANUAL UPDATE
Subject:
Revised Power Window Switch Replacement
Models:
1998-1999 Buick Century, Regal
This bulletin is being issued to revise the Power Window Switch Replacement procedure in the Doors sub-section of the Service Manual. Please replace
the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin
on the affected page.
When removing a power window switch (front or rear door), insert a plastic, flat-bladed tool at the front edge of the switch mounting plate. Press
rearward to release the mounting plate retainer and lift up on the front of the plate.
Disclaimer
