Century V6-3100 3.1L VIN M SFI (1998)
11.
Inspect for barrier material on crank arm cover as shown in Figure 3.
^
If barrier material is NOT present, continue to Step 12.
^
If barrier material IS present, proceed to Step 22.
12.
Disconnect the wiper linkage from the ball stud on the crank arm using J 39232. See Figure 1.
13.
Remove plastic crank arm cover.
14.
Remove wiper motor crank arm assembly retaining screw and remove the crank arm from the wiper motor shaft.
15.
To properly align the new crank arm on the motor shaft, gently place "new" crank arm on the wiper motor shaft. Do not apply any downwards
pressure.
