buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Throttle Position Sensor > < Power Steering Cut-Out Switch|Page 305
Page 2
background image

Fig. 038 - Chart C-1E Power Steering Pressure Signal

1.

Checks for ECM signal voltage on CKT 495, and confirms that ground CKT 450 is OK.

2.

Maximum resistance, or infinity, indicates an open switch.

3.

Less than 1 ohm indicates that the switch is closed when the power steering pressure is high. Switch is OK.

Throttle Position Sensor > < Power Steering Cut-Out Switch|Page 305