buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

A/T - Harsh 3-2 Downshifts|Page 2668 > < A/T - Harsh 3-2 Downshifts
Page 2
background image

BULLETIN COVERS:

Harsh 3-2 shift conditions and specific service information which applies to the correction of these conditions.  Before resorting to the 3-2 Service
Packages available, verify that the harsh condition is not caused by the following:

-

Vacuum Leaks (low vacuum supply to the vacuum modulator) Remember, the available vacuum will be less at higher altitudes. Also, a restricted
exhaust (plugged catalytic converter) can cause a low vacuum. Measure exhaust system pressure as outlined in Section 6F of the Service Manual.

-

Faulty Vacuum Modulator (19) Check for proper modulator function as outlined in Section 7 (Transaxle Unit Repair) of your Service Manual.
Also verify the modulator valve (17) moves freely in its bore and is free of nicks or burrs.

-

Sticking 1-2 Servo Control Valve (373) in Control Valve Assembly (35)

-

Sticking 3-2 Control Valve (340) in Control Valve Assembly (35)

A/T - Harsh 3-2 Downshifts|Page 2668 > < A/T - Harsh 3-2 Downshifts