buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Case, A/T > < A/T - Harsh 3-2 Downshifts|Page 2681
Page 1
background image

Band Apply Servo: Technical Service Bulletins
A/T - New Servo Spring Retainer Added

Bulletin  85-7440-3

Date  July '84

Ref. No. 84-276-7440
SUBJECT:

NEW SERVO SPRING RETAINER ADDED

MODELS AFFECTED:

1985 THM 440-T4 TRANSAXLES MODELS BA AND BS

To reduce the possibility of damage to the reverse servo seal during assembly, a servo spring retainer has been added. This retainer is identical to the one
used for the 1-2 servo spring, and the part number is 8656700. Please make note of this in the 440-T4 section of the service manual on pages 440-T4-26
and 440-T4-67.

FIGURE 1 - REVERSE SERVO SPRING RETAINER

Starting January 16, 1984, (Julian date, 016) all 1985 BA and BS model THM 440-T4 transaxles were built with a new servo spring retainer (See Figure
1).

FIGURE 2 - IDENTIFICATION TAG

The Julian date is on the transmission identification tag located on the side of the case by the governor. Refer to Figure 2 for decoding of the
identification tag.

Case, A/T > < A/T - Harsh 3-2 Downshifts|Page 2681