Century Estate Wagon L4-151 2.5L (1985)
FIGURE 2
SERVICE ACTION (Figure 2)
Inspect the cast iron oil seal rings (607) for wear (indicated by a shiny surface on the O.D.) and the 2nd clutch housing (611) for wear (grooves caused
by the seal rings). The driven sprocket may not appear affected, but must be replaced if these wear conditions are present.
For all 1984 through 1986 model year THM 440-T4 transaxles, it is recommended that the new Vespel (TM) oil seal rings, 4-lobe ring seals and driven
sprocket support be installed with other parts that indicate wear (such as the 2nd clutch housing).
