Century Estate Wagon L4-151 2.5L (1985)
-
Mispositioned sprag elements.
-
Broken ribbon tabs (between the sprag elements).
4.
Disassemble the input sprag clutch assembly (Figure 3) and inspect for:
-
Cracked inner or outer races (#650, #654).
-
Indentation marks on the inner race (#650) that would indicate sprag element "rollover".
Replace the input sprag clutch assembly if any of the conditions described above are present. Use the appropriate service part(s) referred to in the
"Service Parts" section below.
SERVICE PARTS
A.
When replacing the input sprag clutch assembly on a transaxle built before April 1, 1986 (Julian Date 091) use the following service part number:
Part Number
Contents
8646986
(1) Input Sprag Clutch Assembly
(2)
Snap Rings
(1)
Input Sprag Clutch Outer Race
(1)
Input Sprag Clutch Inner Race
(2)
Input Sprag Clutch Wear Plate
B.
When replacing the input sprag clutch assembly on a transaxle built on or after April 1, 1986 (Julian Date 091) use the following service part
number:
Part Number
Contents
8646985
(1) Input Sprag Clutch Assembly (wider
sprag)
(2)
Snap Rings
(1)
Input Sprag Clutch Outer Race (wider)
(1)
Input Sprag Clutch Inner Race (wider)
