Century Estate Wagon L4-151 2.5L (1985)
FIGURE 4 - LUBE DAM WITH ASSOCIATED PART CHANGES
C.
To update a transaxle built before April 1, 1986 (Julian Date 091) or a SRTA transaxle built before May 1, 1986 (Julian Date 121) to use the new
(wider) input sprag clutch assembly, the transaxle must contain the following three new design parts as shown in Figure 4 (replace as required
based on the content/Julian Date of the transaxle):
1.
Part #8658368, lube dam (695) effective March 6, 1985 (Julian Date 065).
2.
Part #8658407, final drive sun shaft (669) effective February 19, 1985 (Julian Date 050)
-
Counter bore added to assembly with lube dam.
3.
Part #8658408,) output shaft (565) effective February 19, 1985 (Julian Date 050).
-
Chamfer removed to assemble with lube dam.
NOTICE:
These three correct design parts must be installed for proper lubrication of the third roller clutch and new design sprag assemblies.
After these parts have been assembled into the unit, the new input sprag clutch assembly (653) and input carrier assembly (662), contained in the service
package listed below, may be used:
Part Number
Contents
8662906
(1) Input Sprag Clutch Assembly (wider)
(2)
Snap Rings
(1)
Input Sprag Clutch Outer Race (wider)
(1)
Input Sprag Clutch Inner Race (wider)
(1)
Input Sprag Clutch Retainer (narrower)
(1)
Input Sun Gear Spacer (wider)
(1)
Input Carrier Assembly Complete (narrower hub)
SERVICE MANUAL REFERENCE
