buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Customer Interest for Wiper Motor: > < Wiper Gear Box|Service and Repair
Page 1
background image

Wiper Motor: All Technical Service Bulletins
Wipers - Intermittent Operation, Build Up on Commutator

Bulletin   

85-8-23

Date  Apr. '86

Ref. No.  85-319-8
SUBJECT:

INTERMITTENT WIPER OPERATION

MODELS AFFECTED: 1984 & 1985 CENTURY AND REGAL 1985 SOMERSET AND ELECTRA

Some pulse permanent magnet depressed park wiper motors (field dates approximately 200-4 through 115-85) may exhibit intermittent starting
conditions in pulse mode. This condition may be due to a build up on the commutator.

Do not rap on motor to correct this condition. The end cap, Part No. 22038791, must be replaced per the following procedure:

WIPER MOTOR COVER AND TABS

1.

Disassemble end cap by bending tabs outward and remove end cap from armature shaft (See Illustration). Do not remove armature.

2.

Spray electrical contact and tape head cleaner on clean cloth and wiper commutator clean. Apply supplied grease to end of armature shaft.

3.

Install new end cap and bend tabs back to original position.

Customer Interest for Wiper Motor: > < Wiper Gear Box|Service and Repair