buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

All Technical Service Bulletins: > < Fuel Pressure Release|Service and Repair
Page 1
background image

Fuel Injector: Customer Interest
Fuel System - Cold Stall/Cold Performance/Code 44

Bulletin  876E23

Date  Dec. '87

Ref. No.

87-212-6E

Corp. Ref. No.  786504R

SUBJECT:

COLD STALL, COLD PERFORMANCE AND CODE 44

MODELS AFFECTED:

1987 CENTURYS WITH 2.5L L-4 ENGINES (VIN CODE R) 1987 SOMERSETS/SKYLARKS WITH 2.5L L-4
ENGINES (VIN CODE U)

Some 1987 models equipped with 2.5L engines may experience poor cold performance and Code 44, and may not stay running. In order to diagnose this
condition, observe the block learn and integrator readings on the scan tool. The readings will be high indicating a lean exhaust condition.

Code 44 scan diagnosis in your service manual section 6E2 may correct the condition. If it does not, the following procedure may be used:

Check the fuel pressure using a 0-103 kPa (0-15 PSI) gage (J29658). If the fuel pressure is not within the specified 62-90 kPa (9-13 PSI) range, repair
the fuel system as necessary. If the fuel pressure is within specification, restrict the fuel return line which increases the fuel pressure and causes more fuel
to be discharged from the injector. At the same time, watch the integrator reading on your scanner. It should decrease. If the return line is restricted long
enough both the integrator and block learn should stabilize closer together. This indicates a restricted fuel injector and it should be replaced.

NOTE:

The block learn may read 128 with the car stopped and idling. It will be necessary to road test the vehicle to have the block learn number
follow the integrator.

All Technical Service Bulletins: > < Fuel Pressure Release|Service and Repair