Century Estate Wagon L4-151 2.5L VIN R TBI (1987)
INTERNAL COMPONENTS ASSEMBLY
Comments indicate that some CS-144 Delcotron generators in the field are being reassembled incorrectly. The internal components must be reassembled
and
tightened in the order indicated below, shown in illustration:
1.
Install rectifier bridge and capacitor. The capacitor strap has an insulator material which rests on the end frame "ground". Bolt rectifier bridge into
place.
2.
Install regulator and brush holder. The capacitor strap "metal side" touches the regulator connection. Tighten insulated screws.
3.
Crimp and solder regulator terminals. Avoid excessive heat.
