buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Customer Interest for Governor Pressure Switch:|9074409|Page 3255 > < Customer Interest for Governor Pressure Switch:|9074409|Page 3253
Page 1
background image

Governor Pressure Switch: Customer Interest
A/T - THM 440-T4 Second Gear Starts

Bulletin   

87-7440-9

Date       

Aug. '87

Ref. No.   

87-165-7440

Corp. Ref. No. 777132
SUBJECT:

SECOND GEAR STARTS

MODELS AFFECTED: 1984-1987 THM 440-T4 (ME9)

FIGURE 1 - THM 440-T4 TRANSAXLE IDENTIFICATION INFORMATION

BULLETIN COVERS

A 1984-1987 vehicle equipped with a THM 440-T4 (Figure 1) may start out in 2nd gear instead of 1st gear. This condition could occur intermittently or
all the time.
SERVICE ACTION

High line pressure could be a cause by holding too much governor pressure and not allowing the 1-2 shift valve to downshift. Check line pressure and
governor pressure. Governor pressure should be below 3.0 psi at 0 mph.

FIGURE 2

Customer Interest for Governor Pressure Switch:|9074409|Page 3255 > < Customer Interest for Governor Pressure Switch:|9074409|Page 3253