Electra V6-181 3.0L (1985)
Front Door Panel: All Technical Service Bulletins
Windows - Front Door Window Switch Plate Retainer
Bulletin 85-10-13
Date
Dec. '84
Ref. No. 85-077-10
SUBJECT:
FRONT DOOR WINDOW SWITCH PLATE RETAINER
MODELS AFFECTED: 1985 ELECTRAS
If a condition is encountered where the door window switch plate retainer and/or clip is broken, it may be repaired as follows:
1.
Remove switch plate from door armrest assembly.
2.
Clamp switch plate face down in vise.
NOTICE:
Center switch plate between two (2) pieces of wood to avoid damaging switch plate finish.
3.
File or grind retainer attaching stud(s) until smooth.
4.
Center punch switch plate stud(s) prior to drilling.
FIGURE 1 - DOOR WINDOW SWITCH PLATE
5.
Using a 3/32" (2.75 mm) drill with a drill stop set at 9/32" (7 mm), drill hole(s) at locations shown in Fig. 1.
6.
Install retainer and/or clip with self-tapping panhead #4 machine screw(s) as shown in Fig. 1.
7.
Connect wiring and install switch plate to door armrest.
8.
Check switch for proper operation.
Warranty Information:
Labor Operation:
T0130
Labor Hour:
0.3 hrs.
Operation Code:
92
