buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Interior Moulding / Trim|Carpet > < Customer Interest for Ash Tray:|85915
Page 1
background image

Ash Tray: All Technical Service Bulletins
Interior Trim - Rattle, Center Instrument Panel Area

Bulletin:

85-9-15

Date:

Aug 1985

Ref. No..:  85-284-9
SUBJECT:

RATTLE, CENTER INSTRUMENT PANEL AREA

MODELS AFFECTED:

1985 ELECTRA AND PARK AVENUE

A rattle, coming from the instrument panel ash tray area with the ash tray open, may be caused by the "snuffer" lid (spring loaded ash tray lid) rattling
against the lower instrument panel.  This lid has been eliminated on current cars, but should not be removed as a service correction for rattling.

Two pieces of sticky-back foam material may be fabricated and installed on top of the two "snuffer" ribbed areas.  Each insulator should be 20 by 42 mm
 and about 3 mm thick (approximately .75 by 1.62 inches and .12 inches thick). Install each insulator along top of rib and position as close to start of  rib
and passenger compartment as possible.

Interior Moulding / Trim|Carpet > < Customer Interest for Ash Tray:|85915