Electra V6-181 3.0L (1985)
clamps to 1.5 N-m (13 in.lbs.).
7.
Measure transmission oil lost during hose replacement and install same amount of new oil in transmission.
8.
Install new service battery 78A-72, part number 1981590. Tighten battery retainer screw to 17 N-m (13 ft.lbs.). Connect, positive cable, negative
cable, and tighten cable bolts to 12 N-m (9 ft.lbs.).
9.
Start engine and check for leaks at cooler hose connections, and at connections of other replaced fluid lines and hoses. Repair, if required.
CAMPAIGN I.D. LABEL
PART C - CAMPAIGN I.D. LABEL INSTALLATION
Install a Campaign Identification label. Each vehicle modified in accordance with the instruction outlined in this procedure will require a Campaign
Identification label. Each label provides a space to include the campaign number, the five (5) digit dealer code of the dealer performing the campaign
service, and the date vehicle was campaigned. This information may be inserted with a typewriter or ballpoint pen. When installing label, clean the
surface of the radiator upper mounting support and apply the campaign label where it is readily visible.
DISPOSITION OF REPLACED PARTS
All replaced parts must be held for disposition by Buick contact personnel. Each replaced part must have a claim tag attached showing the repair order
and the VIN of the vehicle from which it was removed.
