Electra V6-231 3.8L VIN C SFI (1988)
Correction:
1.
Secure 6-way power seat harness just after power feed wires break out from tape wrapping to outboard spring on cushion frame with one (1) strap
(11509088 or equivalent). Trim off excess strap approximately 25.4 mm beyond joint. See View A.
2.
Remove seat switch and disconnect. Bend (by hand only) seat jumper wires at switch connector 180 deg.; Sketch B. Reinstall switch.
NOTICE:
THIS WILL RELIEVE ANY WIRE TENSION AT SWITCH CONNECTOR.
