buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Idle Speed Control Motor <--> [Idle/Throttle Speed Control Unit] > < Fuel Tank Purging Procedure|Page 1793
Page 1
background image

Idle Speed/Throttle Actuator - Electronic: Technical Service Bulletins
Idle Speed Control Assembly - Repair Kit

Model Year  1982

Bulletin No.  82-I-237

File in Group  64A

Number  37

Date  Feb. '83
SUBJECT:

Idle Speed Control Assembly Repair Kit

MODELS AFFECTED:

All 1981, 1982 Gasoline Engines

A revised gear and shaft has been released for 1982 production Idle Speed Control Assemblies. Idle Speed Control Assemblies with the new gear and
shaft may be identified by a yellow dot on the housing near the shaft:

In order to provide these improvements to the service assemblies, two
(2)

separate service repair packages have been released to repair 1981 and 1982 Idle Speed Control Assemblies (I.S.C.). Applications are as follows:

Part Number

Application

17079749

For "J" Series Equipped

With Engine Code "G"

17079750

All Other Engines

The repair kits contain a gear and shaft assembly, a boot, grease, and an instruction sheet.

The repair packages are to be used only if the following condition exists:

Idle Speed Control Assembly runs forward and reverse, but plunger does not extend or retract properly.

WARRANTY INFORMATION

Use applicable Labor Time Guide I.S.C. Assembly R & R

*Kit Installation

.3 Hr.

*

Other Labor Hours

Idle Speed Control Motor <--> [Idle/Throttle Speed Control Unit] > < Fuel Tank Purging Procedure|Page 1793