Electra V8-350 5.7L DSL (1983)
FIGURE 1
b)
Apply a bead of 3M 8011 or equivalent into the new weatherstrip carrier (Figure 1). Allow to dry until adhesive becomes tacky
(approximately 5 minutes).
C)
Install new weatherstrip to flange and allow a minimum of 3 hours before closing lid.
7.
Close lid and retest for water leaks. If water leaks are found, apply additional 3M 8011 or equivalent under weatherstrip outer lip.
Warranty Information
Labor Operation T0077
Labor Time .6 hr
Trouble Code 96