buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Fuel - Injection Pump Pressure Adjusting & Diagnosis|Page 1241 > < Injector Pump - Housing Pressure Altitude Advance
Page 1
background image

Diesel MFI Pump: Technical Service Bulletins
Fuel - Injection Pump Pressure Adjusting & Diagnosis

Bulletin 85-6C-11

Date Jan. '85

Ref.. No. 85-104-6C
SUBJECT:

DIESEL FUEL INJECTION PUMP PRESSURE REGULATORS

MODELS AFFECTED:

1984 CENTURY, REGAL, LESABRE, ELECTRA & RIVIERA WITH 4.3L V-6 OR 5.7L V-8 DIESEL ENGINE

The 1984 4.3L and 5.7L injection pump Housing Pressure Cold Advance (HPCA) regulator and Housing Pressure Altitude Advance (HPAA) regulators
are adjustable. The housing pressure regulator on California (NB2) cars is NOT adjustable. Changes in housing pressure has an effect on timing which
effects emissions, cold starts, idle quality, white smoke and noise level.

These procedures for checking and adjusting the housing pressure regulators replace "Checking Injection Pump Housing Fuel Pressure-Engine Warm" in
the 1984 Chassis Service Manual, Section 6C5. The following diagnosis applies to Low Altitude (NA5) and High Altitude (NA6) equipped cars only. To
find out which system a car was assembled with, refer to the Service Parts Identification Label. It will disclose the system with coding as follows:
NA5 Low Altitude, NA6 High Altitude, NB2 California.

The procedure for checking housing pressure contains the information on how to check housing pressure and also the specifications and diagnosis if
necessary.

Fuel - Injection Pump Pressure Adjusting & Diagnosis|Page 1241 > < Injector Pump - Housing Pressure Altitude Advance