buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Steering Column|Diagrams > < Customer Interest for Steering Column:|8434
Page 1
background image

Steering Column: All Technical Service Bulletins
Steering Column - Rattling Noise

Bulletin

84-3-4

Date

March '84

Ref. No.

84-119-3

SUBJECT:

STEERING COLUMN NOISE

MODELS AFFECTED: 1984

Some 1984 Buick vehicles equipped with tilt steering columns may exhibit a rattling noise in the column. This noise may be from the lock bolt area and
can be repaired by lubricating the lock bolt.

1.

Remove steering wheel, shaft lock cover, shaft lock, canceling cam, canceling cam spring, signal switch, buzzer switch, lock cylinder and lock
housing cover as covered in the 1984 Buick Chassis Service Manual Section 3B4..

LIBERALLY COAT EXPOSED AREA LOCK BOLT

2.

Liberally coat exposed area of lock bolt with lithium base chassis grease as shown in illustration, then reassemble. Refer to the 1984 Buick Chassis
Service Manual Section 3B4 for the reassembly procedure.

Steering Column|Diagrams > < Customer Interest for Steering Column:|8434