buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

All Technical Service Bulletins for Valve Body:|9173|Page 1892 > < All Technical Service Bulletins for Valve Body:|9173|Page 1890
Page 1
background image

Valve Body: All Technical Service Bulletins
A/T - Occasional Long 1-2 Shift When Cold

Bulletin:

85-7200-1

Date:

Feb. 1985

Ref. No.:  85-102-720
SUBJECT:

OCCASIONAL LONG 1-2 SHIFT WHEN COLD

MODELS AFFECTED: SOME 1984 AND EARLY 1985 THM 200-C TRANSMISSIONS

FIGURE 1 - TYPICAL 200C SPACER PLATE

Some 1984 thru early 1985 THM 200C transmissions may experience an occasional long 1-2 shift when cold. To repair this condition, a new spacer
plate went into production on September 24, 1984 (Julian date 268).

When servicing any 1984 thru early 1985 THM 200C transmission built before the above Julian date, remove the valve body spacer plate.. Drill the 2nd
and 3rd clutch exhaust orifice out to 3.57 mm (9/64") (Refer to illustration below). Using a 6.3 mm drill bit, hand chamfer both sides of the hole slightly,
to remove burrs and rough edges.

All Technical Service Bulletins for Valve Body:|9173|Page 1892 > < All Technical Service Bulletins for Valve Body:|9173|Page 1890