Electra Park Avenue V6-231 3.8L VIN 3 FI (1988)
A.
Hook the end of the wiring harness connector around the pin on the EBCM.
B.
Pivot the wiring harness connector into contact with the EBCM connector until it latches against the locking plate.
C.
Check the connector fit by turning the ignition switch to the "run" position. The "ANTILOCK" lamp should turn OFF within 30 seconds.
D.
Turn the ignition switch to the "OFF" position.
E.
Attach the EBCM to its mounting.
