Electra Park Avenue V6-231 3.8L VIN 3 FI (1988)
Brake Hydraulic Unit: All Technical Service Bulletins
Technical Procedure, Campaign Label, Parts Disposition & Warranty Information
TECHNICAL PROCEDURE
1.
Raise hood, install left fender cover.
2.
Remove inboard mounting bolt (see illustration) and install new bolt, Part Number 25525687. Torque to 50 N-m (37 ft.lb.).
3.
Repeat Step 2 for outboard mounting bolt.
4.
Remove fender cover, install campaign label, and close hood.
CAMPAIGN IDENTIFICATION LABEL INSTALLATION
Each label provides a space to include the CAMPAIGN NUMBER, the five (5) digit dealer code of the dealer performing the campaign service, and the
date vehicle was campaigned. This information may be inserted with a typewriter or ballpoint pen. When installing label, clean the surface of the radiator
support tie bar and apply the campaign label where it is readily visible.
DISPOSITION OF PARTS
Replaced parts must be held for disposition by Buick Zone or Branch contact personnel. Parts must have a claim tag attached showing the repair order
and the VIN of the vehicle from which they were removed.
