Electra Park Avenue V6-231 3.8L VIN 3 FI (1988)
5. Retainer (8)
6. Screws (7)
7. Escutcheon (6)
8. Screw (5)
9. Upper trim panel
10. Pull handle escutcheon (4) making sure to connect electrical connector, if present.
11. Screw (3)
12. Window regulator handle, if present.
13. Armrest to trim panel, sliding seat belt through slot provided.
14. Screws (2)
15. Screws (1)
16. Armrest pad to trim panel by pushing pad straight outboard.
17. Screw at front of armrest pad to armrest base (power window system).
18. Wire harness connector to switch on switch plate on armrest pad (power window system).
19. Switch plate to armrest pad (power window system).
