Electra Park Avenue V6-231 3.8L VIN C SFI (1989)
FIGURE 3
FIGURE 4
Servicing The Dual O-Ring Joint
When attempting to service the dual O-ring joint, the following procedures should be followed:
^
*Disassemble:
^
Make sure A/C system is completely discharged.
^
Use Kent-Moore Tool J 38042 (Dual O-ring disassembly tool), to separate the joint while loosening female nut. Refer to Figures 2, 3 & 4.
^
Remove and discard O-rings.
-
Use nonmetallic tool when removing O-rings to prevent chance of damaging seal surface.
Replace O-rings
^
Avoid excessive stretch and twisting of the replacement O-rings.