Electra Park Avenue V6-231 3.8L VIN C SFI (1989)
Air Flow Meter/Sensor: Service and Repair
MPFI Throttle Body
REMOVAL:
1.
Disconnect the negative battery cable.
2.
Remove the air cleaner assembly and fresh air duct.
3.
Remove the MAF sensor electrical connector.
4.
Remove the 4 MAF attaching screws.
5.
Remove MAF sensor.
NOTE: Do not attempt to remove the MAF sensor gasket. It is not removable, and is not serviced separately.
INSTALLATION:
1.
Install the MAF sensor with attaching screws.
2.
Connect the MAF sensor electrical connector.
3.
Install the air cleaner assembly and fresh air duct.
4.
Connect the negative battery terminal.