buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Recall - Fuel Return Hose Replacement|Page 2061 > < Recall - Fuel Return Hose Replacement|Page 2059
Page 2
background image

CAMPAIGN IDENTIFICATION LABEL

9.

Install a campaign identification label. Each vehicle modified in accordance with the instructions outlined in this service procedure will require
Campaign Identification Label. Each label provides a space to include the campaign number, the five (5)-digit dealer code of the dealer
performing the campaign service and the date the vehicle was campaigned. This information may be inserted with a typewriter or ballpoint pen.
When installing label, clean the surface of the radiator upper mounting support, and apply the campaign label where it is readily visible.

DISPOSITION OF REPLACED FUEL HOSE

Replaced hoses must be held for disposition by Buick contact personnel. Each replaced part must have a claim tag attached showing the repair order and
the VIN of the vehicle from which it was removed.

WARRANTY INFORMATION

Dealers are to submit each campaigned vehicle as a separate case on the one-line warranty document, Form S-764. Dealers submitting warranty claims
by teletype terminal are to transmit completions as a separate case.

FAILURE

OPER.

LABOR  OTHER  SUBLET

OPERATION  COUNT  PART NO.  ALLOW.

CODE

NO.

HOURS  HOURS  MTL. TWG

Replace fuel

**

return hose     

1

22506189

*

96

V2250

.5 hrs.    .

1 hr.

-

*

List current dealer price plus 30% of fuel hose.

** .1 hour for administration.

To assure accurate records of all transactions on this campaign, it is recommended that campaign repairs for each vehicle be listed on a separate
repair order. Other repairs performed to the vehicle may be listed on the same repair order, and warranty cases other than campaigns may be listed
on the same warranty document.

Zone authorization is not required.

Dear Buick Owner:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

General Motors has determined that a defect which relates to motor vehicle safety exists in some 1984 Buick LeSabres and Electras equipped with 5.0L
(LV2) V-8 gasoline engines. These vehicles may have been assembled with a rubber fuel return hose which could allow a slow fuel leak while the engine
is running. Under certain conditions, this could result in a fire which could, in time, spread to the passenger compartment and cause burn injuries to
occupants remaining in the vehicle.

To prevent this from occurring on your vehicle, please contact your Buick Dealer to arrange a service date. Your dealer will replace the rubber fuel
return hose. This service will be completed for you at no charge.

Until the service has been completed, you should be alert for indications of fuel leakage underneath your engine near the fuel pump. If leakage is noted,
make arrangements to have the correction performed immediately.

Instructions for making this correction have been sent to your dealer. Parts are available. The labor time to perform the correction is approximately thirty
minutes. Please ask your dealer how much additional time will be needed to process your vehicle.

Your Buick Dealer is best equipped to obtain parts and provide service to ensure your vehicle is corrected as promptly as possible. However, if you take
your vehicle to your dealer on the agreed service date, and he does not remedy this condition on that date or within five (5) days, we recommend you
contact the Customer Assistance Department, Flint home office by calling:

1-800-521-7300, for all except residents of Alaska and Hawaii. In Alaska, call (503) 641-8350. In Hawaii, call (805) 497-8561.

After contacting your dealer and the Buick home office, if you are still not satisfied that we have done our best to remedy this condition without charge

Recall - Fuel Return Hose Replacement|Page 2061 > < Recall - Fuel Return Hose Replacement|Page 2059