Enclave AWD V6-3.6L (2009)
Rear Door Window Regulator: Service and Repair
Rear Side Door Window Regulator Replacement
Removal Procedure
1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Traverse) (See: Rear Door Panel/Service and Repair)Rear Side
Door Trim Panel Replacement (Acadia/OUTLOOK) (See: Rear Door Panel/Service and Repair)Rear Side Door Trim Panel Replacement
(Enclave) (See: Rear Door Panel/Service and Repair).
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement (See: Rear Door Panel/Service and Repair).
3. Remove the energy absorber retainers and energy absorber from the door.
4. Remove the covers that conceal the holes for the regulator bolts.
5. Remove the window to regulator bolts (1). Refer to Rear Side Door Window Replacement (See: Rear Door Window Glass/Service and
Repair/Rear Side Door Window Replacement).
6. Raise and support the window in the full up position.
7. Disconnect the electrical connector from the regulator motor.
8. Loosen the upper bolt (3) that retain the regulator to the inner door.
9. Remove the nut (2) that retains the motor to the door.
10. Remove the lower regulator bolt (4).
11. Lift the regulator/motor upward in order to release the upper bolt (3) from the door.
12. Rotate the upper portion of the regulator forward.
13. Beginning with the lower portion, remove the regulator through the door opening.
14. Remove the upper bolt (3) from the regulator (5).
15. Remove the window regulator motor (6) from the regulator. Refer to Door Window Regulator Motor Replacement (See: Windows and
Glass/Windows/Power Window Motor/Service and Repair/Door Window Regulator Motor Replacement).
Installation Procedure