Enclave AWD V6-3.6L (2009)
Note: The following step is to ensure that the wheel drive shaft assembly does not rotate while the nut is being installed.
19. Insert a brass drift or punch in the brake rotor so that the brass drift or punch rest against the brake caliper mounting bracket.
20. Using a torque wrench and socket, tighten the new wheel drive shaft nut.
Tighten the nut to 260 Nm (192 lb ft).
21. Install the muffler. Refer to Exhaust Muffler Replacement (With NB5) (See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and
Repair)Exhaust Muffler Replacement (With NEA or NEB) (See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair
)Exhaust Muffler Replacement (With LLT) (See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair).
22. Install the rear tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and
Repair).
23. Lower the vehicle.