Enclave AWD V6-3.6L (2009)
Sunroof / Moonroof Panel: Service and Repair
Roof Stationary Window Replacement
Roof Stationary Window Replacement
Special Tools
*
J 24402-A Glass Sealant (Cold Knife) Remover
*
J 39032 Stationary Glass Removal Tool
*
Urethane Adhesive Kit GM P/N 12346392 or Equivalent
*
Isopropyl Alcohol or Equivalent
*
Cartridge-type Caulking Gun
*
Commercial-type Utility Knife
*
Razor Blade Scraper
*
Suction Cups
*
Plastic Paddle
Removal Procedure
Warning: Refer to Cracked Window Warning (See: Windows and Glass/Service Precautions/Cracked Window Warning).
1. Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
Warning: Refer to Defroster Outlet Warning (See: Heating and Air Conditioning/Service Precautions).
2. Cover the following parts to protect from broken glass:
*
Upper dash pad
*
Defroster outlets and A/C outlets
*
Seats and carpeting
Warning: Refer to Glass and Sheet Metal Handling Warning (See: Service Precautions/Technician Safety Information/Glass and Sheet
Metal Handling Warning).
Note: The roof window reveal molding is a one piece molding and fills the cavities between the body and the roof window (1).
3. If equipped, inspect the roof window reveal molding for damage. If the roof window reveal molding is damaged or becomes detached from the
window, the reveal molding cannot be reused and must be replaced.