Enclave AWD V6-3.6L (2009)
Front Door Weatherstrip: Service and Repair
Front Door Opening Weatherstrip Replacement
Front Door Opening Weatherstrip Replacement
Removal Procedure
1. Remove the front door sill plate. Refer to Front Side Door Sill Trim Plate Replacement (See: Interior Moulding / Trim/Scuff Plate/Service and
Repair).
2. Remove the weatherstrip (1) from the pinch-weld flange (2).
Installation Procedure
1. Align the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening.
2. Install the weatherstrip to the pinch-weld flange. Ensure the weatherstrip is fully seated.