Enclave AWD V6-3.6L (2009)
1. Apply a light coat of high temperature brake lubricant to the park brake shoe contact areas of the brake backing plate.
2. Install the front park brake shoe (2).
Ensure the park brake shoe is properly seated in the park brake actuator.
3. Install the front park brake shoe hold down spring (1) by compressing the spring and rotating 1/4 turn.
4. Install the rear park brake shoe (3) and the lower park brake shoe retainer spring (2).
Ensure the park brake shoe is properly seated in the park brake actuator.
5. Install the rear park brake shoe hold down spring (1) by compressing the spring and rotating 1/4 turn.