Enclave AWD V6-3.6L (2009)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal and Housing Replacement
Removal Procedure
1. Remove the oil pan. Refer to Oil Pan Replacement (See: Engine Lubrication/Oil Pan/Service and Repair).
2. Remove the engine flywheel. Refer to Engine Flywheel Replacement (See: Transmission and Drivetrain/Flex Plate/Service and Repair).
3. Remove the crankshaft rear oil seal and housing. Refer to Crankshaft Rear Oil Seal and Housing Removal (See: Service and Repair/Overhaul).
Installation Procedure
1. Install the crankshaft rear oil seal and housing. Refer to Crankshaft Rear Oil Seal and Housing Installation (See: Service and Repair/Overhaul).
2. Install the engine flywheel. Refer to Engine Flywheel Replacement (See: Transmission and Drivetrain/Flex Plate/Service and Repair).
3. Install the oil pan. Refer to Oil Pan Replacement (See: Engine Lubrication/Oil Pan/Service and Repair).