Enclave AWD V6-3.6L (2009)
4. Install new sealing washers on the evaporator TXV tube fittings. Refer to Sealing Washer Replacement (See: Coupler HVAC/A/C Coupler
O-ring/Service and Repair/Sealing Washer Replacement).
5. Install the condenser tube and evaporator hose to the TXV.
6. Install the TXV nut.
Tighten the nut to 20 Nm (15 lb ft).
7. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Procedures/Refrigerant
Recovery and Recharging).
8. If removed, install the windshield washer solvent heater. Refer to Windshield Washer Solvent Heater Replacement (Traverse) (See: Wiper and
Washer Systems/Washer Fluid Heater/Service and Repair)Windshield Washer Solvent Heater Replacement (Acadia, Enclave, OUTLOOK) (See:
Wiper and Washer Systems/Washer Fluid Heater/Service and Repair).
9. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair).
10. Leak test the fittings using the J 39400-A .
