Enclave AWD V6-3.6L (2009)
2. Install the auxiliary A/C evaporator tubes (3) to the clamps (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the heater/A/C tubes retaining nut (1) to the retaining studs and clips (2) along the frame in four places.
Tighten the nut to 7 Nm (62 lb in).
4. Install the auxiliary A/C evaporator tubes (2) to the TXV tube and condenser tube and install the retaining nuts (1).
Tighten the nut to 16 Nm (12 lb ft).
5. Install air cleaner duct. Air Cleaner Outlet Duct Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance
Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair).